Maintenance tips for your custom lanyard 

It’s that time of year again: it’s conference season! With all the fun comes the need to keep your custom lanyard looking good between meetings. Here are some key ways to keep custom lanyards looking like new for years to come. 

Choose the right material 

You need to think about a few things when choosing a material for your custom lanyard. First, you have to choose what kind of material you want to use. You can make your lanyard out of metal, plastic, or a polymer. 

Most people choose metal because it is strong and lasts a long time. Plastics are also widely used because they are light and easy to shape. Polymers are great for making lanyards with many layers or designs. 

Get the right size 

When it comes to custom lanyard maintenance tips, getting the right size is one of the most important things to do. The lanyard won’t work right if it’s too big or too small. 

To find the right size, measure where you want the lanyard to go around your neck. This number should be close to twice the size of your neck. Then, use that number to decide what size to get. For instance, if the circumference of your neck is 18 inches, choose a lanyard that is at least 36 inches long.  

Once you’ve decided on a size, use scissors to cut out the lanyard. Be careful not to cut too close to your skin. You want the lanyard to be a little loose so it can move with your body. Last, connect the lanyard to the clasp by threading the end through both sides of the clasp and pulling it tight. 

Double check the measurements 

When making a custom lanyard, it’s important to double-check the measurements you take. Make sure the length, width, and thickness of the lanyard are all right before you start sewing it. 

Also, make sure the lanyard is thick enough that it won’t break easily. The lanyard will last longer if it is thicker. Use a safety pin as a guide to figure out how thick to make the lanyard. Make sure to change the lanyard’s thickness as needed so that it is strong but still easy to wear. 

Make sure the cord is durable 

When making custom lanyard cords, it’s important to make sure the cord is strong. This will make the cord last longer and be less likely to break. 

Using a hair dryer to heat up the cord is one way to make it last longer. This will make the cord stronger so it won’t break as easily. Before you use the cord, you can also make it longer by pulling on one end and then letting go. This will make it harder for the cord to break when you’re trying to attach it to something. 

Also, you should keep the cord clean. Cords that are dirty are hard to work with and can cause problems. Make sure to wash the cord with warm water and a mild soap to keep it clean. If you need to get dirt or stains off the cord, you can also use a lanyard cleaner. 

Use a heat gun if necessary 

If you have a custom lanyard with a pin and a clasp, make sure it stays in good shape. If the lanyard gets dirty or frayed, you may need to have it fixed or replaced by a professional lanyard maker. 

Using a heat gun, you can fix the clasp if it gets broken. Put the clasp over a stove flame or an open flame and heat it until it is warm enough to bend. Make sure you don’t heat it too much or the clasp may start to break. 

Store your lanyard properly 

You should always store your custom lanyard in the right way to keep it in good shape. You should never tie it to a fence post or hang it on a hanger. Instead, put it somewhere safe where it can’t be hurt. 

Also, you should be careful when you use it. Make sure the cord stays straight and doesn’t get tangled. Before you use the lanyard, try to untangle it if it gets tangled. And make sure to clean it every time you use it so that dust and dirt don’t build up on the cord. 

Why you should trust Vograce to get the best custom lanyards 

When it comes to custom lanyards, there are a few things that make Vograce stand out. One of the most important things is that they focus on softness and good printing. Vograce has made a promise to use the softest materials possible to keep their prints looking bright and new. 

This is because so many companies are using hard materials to save money. They also have a wide range of printing options to fit any budget, and their style is always up to date with the latest trends. Lastly, you can’t ignore how cheap they are. Even clients with the tightest budgets can find a lanyard that meets all of their needs. 


A custom lanyard is a great way to give your outfit a little more of your own style. But like any other piece of clothing, it needs to be taken care of regularly if you want it to look its best. Here are some tips on how to keep your custom lanyard looking good and working well: Do not put it in the dryer and do not bleach it. Wash it on the gentle cycle in cold water with a mild soap.

Leave a Reply

Back to top button
casino online judi slot agen slot slot online situs slot slot terbaru judi bola daftar slot bandar togel poker idn slots online link slot judi slot agen idn idn poker agen bola poker online link bola agen togel situs judi togel terpercaya slot gacor judi togel bandar slot slots gacor judi poker deposit slot togel online situs togel togel terbaik togel macau bonus slot togel slot togel resmi togel pulsa bo togel togel 100perak togel 4d toto online togel jackpot togel hongkong togel singapore jackpot slot slot terbaik slot jackpot slot pragmatic jackpot terbesar judi slot Bandar togel